Multichromic polymers based on pyrene clicked thienylpyrrole

In this study, the effect of pendant pyrene on the optical and electronic properties of poly(2,5‐dithienylpyrrole)s was studied. For this purpose a new pyrene coupled 2,5‐dithienylpyrrole derivative (SNS‐pyrene) was synthesized through click reaction. SNS‐pyrene was electrochemically polymerized and its electrochemical and optical properties were investigated by electrochemical and optical techniques. The polymer had a band gap of 3.36 eV and displayed light green to blue color variation upon oxidation in less than 2.48 s. Additionally, electrochemical copolymerization of SNS‐pyrene with 3,4‐ethylenedioxythiophene was achieved whilst a detailed investigation was performed on the effect of electrochemical polymerization conditions on the optoelectronic properties of the copolymers. Studies revealed that the copolymers exhibit multichromic reversible redox behavior with lower band gaps and shorter switching times than their parent polymer, P(SNS‐pyrene) © 2014 Society of Chemical Industry.     

A methodology to assess suitability of a site for small scale wet and dry CSP systems

This study presents a methodology to assess suitability of a site for small scale concentrated solar power (CSP) systems for its energy conversion efficiency and make‐up water requirement. Energy conversion efficiency of CSPs relies not only on the level of direct solar radiation but also on the performance of the cooling system. Regions with high solar potential have to deal with heat rejection at elevated temperatures which causes reduced energy conversion efficiencies due to high condenser temperatures. It is desirable to utilize wet cooling systems as they can achieve temperatures lower than the dry bulb temperature by evaporative cooling. On the other hand, such regions usually lack water resources which deteriorate the sustainable nature of CSP applications. This study combines various available models for both solar resource estimation and cooling systems' performance considering (i) the influence of ambient temperatures, and (ii) the influence of humidity levels. These models are integrated together to analyze the use of dry or wet cooling systems in terms of overall energy output and water consumption at a selected site in northern Cyprus. The model inputs consist of only annual hourly surface weather data and the location of the site of interest. The results show that dry cooling unit at northern Cyprus is capable of saving water about 18.7 ton/MWh while it produces 27% less energy compared to the wet cooling alternative for the representative annual weather data. Copyright © 2015 John Wiley & Sons, Ltd.     

Investigation of novel anthracene‐bridged carbazoles as sensitizers and Co‐sensitizers for dye‐sensitized solar cells

Novel anthracene‐bridged carbazole organic dyes (designated ML4 and ML5) were synthesized using the Suzuki coupling reaction. These dyes were designed to be donor‐π‐conjugation‐acceptor sensitizers for dye‐sensitized solar cells, where the carbazole moiety acts as the donor, the anthracene moiety provides the π‐conjugation, and the cyano acrylic acid acts as the acceptor. Solar cells were fabricated with ML4 and ML5 alone with low power conversion efficiencies, but they were also used as co‐sensitizers with N719, improving the efficiency of the dye‐sensitized solar cells produced by ~3% and ~10%, respectively. Copyright © 2015 John Wiley & Sons, Ltd.     

The Lise Meitner-Minerva Center for Computational Quantum Chemistry: 18 Years of Israeli-German Collaboration

We tell the story of the Lise Meitner-Minerva Center, its establishment and activities, its members and their scientific activity, and its instrumental role in weaving intense relationships with the theoretical community in Germany, and in amalgamating the Israeli community of computational quantum chemistry into a national center that enjoys a high international reputation.     

Use of Lactobacillus paracasei isolated from whey for silver nanocomposite synthesis: Antiradical and antimicrobial properties against selected pathogens

The present research emphasizes the use of safe, inexpensive, and available whey using Lactobacillus paracasei as a source in silver nanocomposite synthesis as an alternative bioactive agent for dairy and biomedical applications. Through the multiinstrumental approach used in this study based on spectroscopic and microscopic methods as well as spectrometric techniques, the characterization and evaluation of silver composites and their antimicrobial and antiradical properties were enabled. Synthesized silver nanocomposites have been found in form of nanocrystals, naturally coated by an organic surface with high antimicrobial and antiradical properties. Furthermore, this work also presents an innovative approach regarding the organic surface (naturally secreted by the bacteria isolated from whey) of the core of nanoparticles, which has already been explored and therefore is starting to supplement the scientific approach concerning biologically synthesized nanoparticles. This work also presents a general frame on the resistance subject by performing the trial interaction of commercially available antibiotics (kanamycin and ampicillin) with new bioactive compounds that can create novel knowledge on complementing their action. Moreover, synthesized silver nanocomposites have shown great antioxidant and antimicrobial effects against various foodborne pathogens from dairy products and drug resistance pathogens found in the medical area to rank on the top of mortality rate.     

Lycopene-rich cream obtained via high-pressure homogenisation of tomato processing residues in a water–oil mixture

Tomato processing residues are still rich in bioactive compounds that may be recovered and reused, with environmental and economic benefits. This short communication discloses for the first time that the high-pressure homogenisation (HPH) treatment of tomato residues in the presence of water and sunflower oil is able to promote the extraction of bioactive compounds concurrently to the formation of an oil-in-water emulsion stabilised by the micronized residues. The mechanical disruption effect of HPH improved the mass transfer of lycopene into the oil phase, and formed fine fibrous debris, improving stabilisation and visual appearance of the emulsion. Results showed a progressive increase of lycopene concentration in the cream phase up to 5 HPH passes and a concurrent reduction of its content in the pellet. Total polyphenols content and antioxidant activity in the aqueous phase gradually decreased when increasing the number of passes, suggesting their progressive transfer in the cream phase. The proposed process that relies on a purely physical treatment and uses only water/sunflower oil as extraction media resulted in the production of a lycopene-rich cream of potential use as a functional food ingredient.     

Deep-blue thermally activated delayed fluorescence emitter with a very high fluorescence rate

Conventional thermally activated delayed fluorescence (TADF) molecules achieve small energy differences between the lowest singlet and triplet excited states (ΔE_ST) by enhancing the intramolecular charge transfer, which inevitably leads to a wide emission spectrum and low fluorescence rate. Here, we prepared a deep blue TADF molecule via a small ΔE_ST pyridine-phenol fluoroboron complex as the acceptor. The small ΔE_ST is maintained when carbazole donors are attached to the 4-position of the phenyl rings in the fluoroboron complex. Benefiting from the strong electron coupling between the donor (D) and acceptor (A) moieties, the compound Cz-4-BF exhibits a high fluorescence rate of 4.8 × 10⁸ s⁻¹ and a small D-A dihedral angle change in the excited state. Consequently, a photoluminescence (PL) quantum yield of nearly 100% and a PL spectrum with full-width at half-maximum (FWHM) < 60 nm were obtained in solution and low-concentration doped films. A TADF-sensitized fluorescence (TSF) device containing Cz-4-BF achieves an external quantum efficiency of 21%, which is higher than the devices employing classical fluorescent emitters and multiple resonance-type TADF emitters. The Cz-4-BF-based TSF device shows significantly improved color coordinates of (0.14, 0.10) versus a control device without Cz-4-BF.     

In situ measurements of human cough aerosol hygroscopicity

The airborne dynamics of respiratory droplets, and the transmission routes of pathogens embedded within them, are governed primarily by the diameter of the particles. These particles are composed of the fluid which lines the respiratory tract, and is primarily mucins and salts, which will interact with the atmosphere and evaporate to reach an equilibrium diameter. Measuring organic volume fraction (OVF) of cough aerosol has proved challenging due to large variability and low material volume produced after coughing. Here, the diametric hygroscopic growth factors (GF) of the cough aerosol produced by healthy participants were measured in situ using a rotating aerosol suspension chamber and a humidification tandem differential mobility analyser. Using hygroscopicity models, it was estimated that the average OVF in the evaporated cough aerosol was 0.88 ± 0.07 and the average GF at 90% relative humidity (RH) was 1.31 ± 0.03. To reach equilibrium in dry air the droplets will reduce in diameter by a factor of approximately 2.8 with an evaporation factor of 0.36 ± 0.05. Hysteresis was observed in cough aerosol at RH = ∼35% and RH = ∼65% for efflorescence and deliquescence, respectively, and may depend on the OVF. The same behaviour and GF were observed in nebulized bovine bronchoalveolar lavage fluid.     

Dichlorinated Dithienylethene-Based Copolymers for Air-Stable n-Type Conductivity and Thermoelectricity

Two donor–acceptor (D–A) polymers are obtained by coupling difluoro- and dichloro-substituted forms of the electron-deficient unit BDOPV and the relatively weak donor moiety dichlorodithienylethene (ClTVT). The conductivity and power factors of doped devices are different for the chlorinated and fluorinated BDOPV polymers. A high electron conductivity of 38.3 and 16.1 S cm⁻¹ are obtained from the chlorinated and fluorinated polymers with N-DMBI, respectively, and 12.4 and 2.4 S cm⁻¹ are obtained from the chlorinated and fluorinated polymers with CoCp₂, respectively, from drop-cast devices. The corresponding power factors are 22.7, 7.6, 39.5, and 8.0  µ W m⁻¹ K⁻², respectively. Doping of PClClTVT with N-DMBI results in excellent air stability; the electron conductivity of devices with 50 mol% N-DMBI as dopant remained up to 4.9 S m⁻¹ after 222 days in the air, the longest for an n-doped polymer stored in air, with a thermoelectric power factor of 9.3  µ W m⁻¹ K⁻². However, the conductivity of PFClTVT-based devices can hardly be measured after 103 days. These observations are consistent with morphologies determined by grazing incidence wide angle X-ray scattering and atomic force microscopy.     

Measurement of Electrophysiological Signals In Vitro Using High-Performance Organic Electrochemical Transistors

Biological environments use ions in charge transport for information transmission. The properties of mixed electronic and ionic conductivity in organic materials make them ideal candidates to transduce physiological information into electronically processable signals. A device proven to be highly successful in measuring such information is the organic electrochemical transistor (OECT). Previous electrophysiological measurements performed using OECTs show superior signal-to-noise ratios than electrodes at low frequencies. Subsequent development has significantly improved critical performance parameters such as transconductance and response time. Here, interdigitated-electrode OECTs are fabricated on flexible substrates, with one such state-of-the-art device achieving a peak transconductance of 139 mS with a 138 µs response time. The devices are implemented into an array with interconnects suitable for micro-electrocorticographic application and eight architecture variations are compared. The two best-performing arrays are subject to the full electrophysiological spectrum using prerecorded signals. With frequency filtering, kHz-scale frequencies with 10 µV-scale voltages are resolved. This is supported by a novel quantification of the noise, which compares the gate voltage input and drain current output. These results demonstrate that high-performance OECTs can resolve the full electrophysiological spectrum and suggest that superior signal-to-noise ratios could be achieved in high frequency measurements of multiunit activity.